First Rendering

First Rendering
Brian Jennings First Crack At A Design

Wednesday, August 31, 2011

Its been a while!

Finally found some time to post up. We got the car all jammed out and reassembled. Now for the finish body work. Its at a stage where a real professional is needed and that isn't me. Brian and his crew are trying to find time to finish it up, but its been a struggle.

In the meantime, I have been building a 1950 chevy. I have redone the engine, suspension and I am in the process of chopping it..I'll try to get a blog together for that too.

Friday, February 11, 2011

Test Panel Is Done

Check out some pics of the test panel Brian put together based on his initial design. The blue is Belize Blue, from Honda of all places, but it was a unanimous decision. The Brushed stainless accents with orange hand striping are awesome. We are still debating the orange, but the rest of the scheme is a go.

Sunday, January 30, 2011

Steering is done!....Again!

Last weekend I got the new Flaming River rack in...it was supposed to be dimensionally identical to a regular MustangII rack. Yeah right! We had to adjust ( with a cutoff wheel) the cross member tweak he tie rod ends and trim the inner tie rods. Today I got the last bit of trimming done and got them all adjusted so that I have travel all the way to the stops.
Threw in some pics of Brians car also. I got that finalized and got it timed, so he is ready to go to paint.
I worked on the fender skirts today and got them a little closer to perfect.

Thursday, January 13, 2011

Car is coming apart again! And for the last time!

Got the decklid and fenders off today for finishing and jamming. Gotta pick the color tomorrow, its gonna be a big day. This week I got Brian's Biscayne running and tomorrow, with any luck, I'll get the brakes bled and get it moving around under its own power again. We hope to get both cars finished for Santa Maria. Stay tuned

Monday, January 3, 2011

At last, an update!

Huge thanks to Brian, Brett and Bob for kicking ass on the car last Friday. They managed to get it into final prime and it looks SMOOOOOTH! Found a couple of little spots that need some finishing, but its pretty close. Looking forward to blasting it apart and getting it jammed soon!

Wednesday, November 24, 2010

No new pics

BUT..thanks to Brian and Jamie, we managed to get the whole car blocked down at 150 and it came up really nice. We need to pop the trunk off and re-glue the inside framework so that the skin doesn't flex so much and we can get it flat. Otherwise, there is one small corner of the hood that needs some love and we are ready to guide coat it again and block it down further. We are actually getting close to final prime!

Sunday, November 7, 2010

heavy prime complete

We got the car in the booth Saturday morning. Hit it with 150 grit,wiped it down and started priming. Brian and Brett layed two gallons of feather fill on it and it turned out great. We have. Couple of small things to fix and then we guidecoat,sand with 150, guidecoat again and go 220 then another prime session.

Sunday, October 31, 2010

Finally an Update!

We have been even more slammed than usual at the shop, so my time to work on the car and post has been limited. Work continues to progress on the body, with the car going in for another primer session sometime this week.
I got the gas hood shock brakets made and Brian helped me install them.  They work great and now I don't have to worry about being decapitated if the hood prop slips.
My fancy new Flaming River XL steering rack arrived, but I haven't had time to test fit it yet.  Hope it fits.
Spent some time with the fender skirts, smoothing them out and welding up the holes for the trim.
Spent an entire day on Brian's '60 Biscayne project getting the front suspension put back together; it should be a roller soon.

Tuesday, September 28, 2010

More Body Work

Nothing very exciting to post.  Been doing more bodywork for the last couple of weeks.  I did get the glovebox installed and the power trunk actuator in place.  I hope to get some primer on it this weekend or at least get the bodywork done enough to head into a deep prime.

Sunday, September 12, 2010

3 Days of Body Work

Bob showing me how its done
I managed to spend half a day on Friday and all of Saturday and Sunday working on the car.  Friday I got all the plumbing finished for the intercooler water pump.  In typical fashion, the motor runs, but doesn't move any water.  I am assuming the impeller is hosed, I hope my supplier will warranty it!
We finished blocking the car and I used the magic dent machine to pull up all the low spots.  Some judicious hammering on the high spots got me ready for filler.
Today I wiped the Rage filler on all the low spots and broke it down with a DA and some 80 grit.  Hopefully Brett has some time this week to help me block it all out and see what we have.
Bob suprised me this morning and came by to do a bunch of metal work.  He welded up the emblem holes in the rear quarters, cut out and patched the passenger wheel well lip, patched the driver's quarter tip, and completely patched the trunk seam corners that were wasted.
I finished off the day by liberally filling those corners and grinding out the factory lead in the door/body seams.

Monday, September 6, 2010

Interior Sneak Peek

Snapped a few shots of the front and rear seats for the car.  Jaime's work is top notch and very affordable.  I took a couple of pics of the stainless mesh he used for the rear speaker grille.  It was a scrap piece from Brian's Biscayne and I wasn't sure if Jaime could make it work or not.  It turned out beautifully!  He is now working on one of the rear wheel well plastics so that we can build the rest of the door panels from there.

Friday, September 3, 2010

Quick Video

Quick Video of the car doing a burnout and popping the boost hose

Intercooler Piping and Sealer: Done

We got the tub taped and sealed this week and got the fenders done too.  I got some guide coat on them so I can start blocking and see where the bad spots are.  This weekend I'll get the doors, hood and trunk done, along with the skirts and some small pieces.

Danny came by today and Jason helped him get the intercooler piping all done.  It is sweet.  As you can see in the video, I definitely need to bead the piping to keep it on.
My front and rear seats came back as well.  I will get some pics up asap.

Sunday, August 29, 2010

Ready to Seal

I am probably going to regret this in the morning, but I spent the whole day with the DA and a grinder and got the ENTIRE car knocked down with 80-grit. Have I mentioned before how freakin' huge this thing is? WOW. I guess I should be glad it doesn't have a roof.
I included some pics of the pristine NOS hood that Kevin sent down. All I had to do was scuff it up and its ready to prime.
Got some nice pics of it in the sun too.
Hopefully Brian has some time one night this week so we can wipe it down and shoot some sealer on everything. Then I get to put it all back together, throw some guide coat on it, and get to blocking.

Friday, August 27, 2010

Burnout Complete

Last night we rigged up some piping to get boost to the motor so that I could cruise it around the parking lot a little. Of course that required a mandatory first Burnout to..ahem..verify that the Posi works..yeah, that's it...
It works. And the motor is pretty snappy given it still has stock injectors and no tuning. It made boost fast enough to blast one of the boots in half.

OK, back to real work now. Getting some of the panels in primer this weekend.

Wednesday, August 25, 2010

Body Work...ARGGGG

OK, so over the past ten days, we managed to get the hood, doors, decklid and the bulk of the shell taken down to metal. The shell is actually really great-better than expected.
The hood had some obvious bondo in it, but it was pretty hammered when we got it stripped. The AWESOME news is that a guy named Kevin contacted me and had an NOS hood in his rafters that he was willing to GIVE to me--if I could get it down here from Washington state. I started asking around and one of Bay Auto Body's old partners was headed down from Seattle, so I was able to make a deal and get that hood coming.
The other crappy spot was the driver's door. It looked good in primer, but MAN it was hammered. I found a bullet hole, several creases and tons of poorly executed bodywork. Turner's Auto Wrecking in Fresno had a driver's door, so that's on the way now. Everything else looks salvageable.
The intake piping got started last weekend, but I ran out of time and this week has been nuts at the shop, so it will be this weekend before I can get back to it.

Wednesday, August 18, 2010

Its Driving! Check out the first video!


Finally got an hour to get the other axle cut and installed.  Got it going late yesterday.  Now I can get the exhaust done so it doesn't look like I have a BBQ going under the hood.

Sunday, August 15, 2010

Bodywork Has Begun!

OK, I have corrected my axle issue and moved on to the next large, daunting task.  The Body.  If you have never seen a Newport, or any other C-Body Chrysler, let me clarify one thing: They are HUGE.  Like, aircraft carrier huge.  This becomes painfully apparent when you set out to sand off 43 years of paint and previous repair work.
Brian Jennings, the future painter of Rattlerod, hooked me up with an 8" DA and an 8" electric buffer/sander.  I managed to get the driver's quarter and most of the passenger's quarter done today.  I will probably be bedridden for a couple of days, but I got it done.  On the plus side, I found no appreciable rust anywhere, and just one poorly repaired crease on the driver's side.  Brian assures me that he can make quick work of the crease with the stinger.
Check out the pics of the sweet patch panel that Bob made also.  Inner and outer fit like a charm and are tacked in, awaiting final welding.
I also got my coolant lines finalized and Danny is working on a custom, sheetmetal intake setup so that we can complete the piping for the intake.  Since we missed Redding, I am now hoping to get it to the GoodGuys show at the end of August.  I'll take it, even if it has to go on a trailer.  I should at least be able to cruise it around the event.

Wednesday, August 11, 2010

Quick update..

OK, so the brakes fought me for 2 days.  Turns out the Wilwood Prop Valve wasn't allowing any fluid to the rear brakes.  I bypassed it for now and the brakes are good.  Wiring is pretty much done until I get the light harnesses and stereo stuff in.
We keep digging in to the bodywork and everything still looks great.  Bob got one of the quarters tacked in, and I'll have pics of the work on Saturday when he gets the other one done.
Had a minor setback with the transmission, we must have nicked the front seal and it was leaking, so we pulled it and resealed it.
You know the adage "Measure twice, cut once"...well, I did that, unfortunately, my math skills must have been off that day, because I managed to cut one of the axles 1/2" too short..DOH!  The car won't motivate very well with one side of the diff spinning free.  Randy's Ring and Pinion is sending out another on for me today, so by tomorrow night (providing I can measure it correctly) the car will be moving under its own power.